MT1 and MT2 MicroTorsion Testing System - Operating Instructions

These instructions describe the function, operation and maintenance for various models of the MT testing systems as depicted in Table 2-2 on page 2-2. If unsure of your specific model, refer to “System identification” on page 1-6.

  • Manual
  • 7/22/2020
  • 0.9 MB

MT1 and MT2 MicroTorsion Testing System - Pre-Installation Manual

These instructions describe the site preparation, unpacking, lifting and installation of Instron Model MT MicroTorsion Testing Systems. These instructions assume the following: • Your system consists of a frame, a control unit, a user control panel, a torque cell, a computer system with an Instron materials testing software package, and any testing accessories necessary to secure the specimen in the test space. It is important that the site be adequately prepared in order to avoid unnecessary delays in the installation process and to ensure that the MT testing system operates without interference from various environmental conditions (i.e. excess building vibrations or extreme temperature and humidity levels).

  • Manual
  • 7/22/2020
  • 0.7 MB

KPX Static Hydraulic Universal Testing System - Reference Manual

This Equipment Reference Manual has been prepared to provide customers with assembly drawings and schematics that pertain to the various models of KPX Static Hydraulic Universal Testing Systems. These drawings are provided for your use and Instron personnel use only. These drawings are the property of Instron and may be subject to return upon demand. The contents of this manual must not be copied or submitted to outside parties for use or examination.

  • Manual
  • 7/22/2020
  • 2.2 MB

KPX Static Hydraulic Universal Testing System - System Concepts Manual

These instructions provide additional information beyond what is necessary to operate the various models of the KPX testing systems. These instructions are intended for a laboratory or facilities supervisor, or Instron service personnel. These instructions assume the following: • You are an operator familiar with the operation of materials testing systems in general. • Your system has been installed in its final location according to the requirements outlined in the system’s Pre-Installation Manual. • Your system consists of a frame, a hydraulic power supply, a control unit, a computer system with an Instron materials testing software package, and any testing accessories necessary to secure the specimen in the test space. • Software test methods that are appropriate for your testing requirements are available. These instructions do not include the development of test methods within the materials testing software. This is covered in more advanced training that can be provided by Instron Service and Training departments.

  • Manual
  • 7/22/2020
  • 1.4 MB

KPX Static Hydraulic Universal Testing System - Operating Instructions

These instructions describe the function, operation and maintenance for various models of the KPX testing systems.

  • Manual
  • 7/22/2020
  • 1.3 MB

KPX Static Hydraulic Universal Testing System - Pre-Installation Manual

The information in this document is intended to aid customers in the site preparation, unpacking, lifting, and installation of the Instron Model KPX Static Hydraulic Universal Testing Systems.

  • Manual
  • 7/21/2020
  • 1.0 MB